Siemens placement machine HS60 comes from Europe and the United States, and the equipment is excellent. The following is a detailed introduction of Siemens placement machine HS60:

Basic parameters of Siemens placement machine HS60:

Siemens placement machine hs60 has 4 placement heads and 12 nozzles/head, placement speed 60000 points/H

Head type: 12 nozzle collection and placement head

Number of cantilevers: 4

Theoretical placement rate: 60000cph

Component range: 0.6mm x 0.3mm (0201) to 18.7mm x 18.7mm

Higher placement accuracy (4 sigma): 80/75um

PCB size that can be attached:

Single track: 50mm x 50mm to 368mm x 460mm

The width can be expanded to 508mm if necessary

When double track: 50mm x 50mm to 368mm x 216mm

The width can be expanded to 242mm if necessary

Component feeder capacity: 144 rails, 8mm tape

Operating system: Microsoft Windows/RMOS

Power: 4KW

Compressed air requirements: 5.5-10bar, 950NI/min, pipe diameter 3/4.

All our SMT equipment comes from Japan or Europe. The SMT equipment there has less usage time and good maintenance, so the equipment can be reused for a longer life, with higher precision and better stability. Therefore, it is favored by SMT buyers.

We have about 40 after-sales service engineers to serve customers 24 hours a day. The spare parts warehouse stores a large number of replaceable parts. The electronic maintenance department can help customers repair to the board level. Respond to customers at any time and respond to their needs.