Your current location :Home>>Product>>Chip mounter>>Fuji patch machine

ContactContact

Shenzhen Tepu Ke Electronic Equipment Co.,Ltd.

Contact: 135 1032 1270 (Miss Jiang)

Mail box: market@topsmt.com

Address: 201, Building 4, Innovation Port, Hanyu Bay, Fuhai Street, Baoan District, Shenzhen

Fuji placement machine NXT-M3III

2023-10-10
5110
Fuji placement machine NXT-M3III

Detailed introduction

characteristic:

Fuji NXT-M3III modular high-speed multi-function placement machine , with a thorough modular design concept, foreign equipment, good condition and new equipment. By using the high-speed XY robot and tape feeder and the use of the newly developed camera "Fixed On-the-fly camera", it is possible to improve the placement capabilities of all components from small components to large special-shaped components. 


 m3iii.png


Fuji NXT M3III placement machine parameters:

Target circuit board size (LxW):

48mmx48mm~534mmx510mm (double transport rail specification)

48mmx48mm~534mmx610mm (single transport rail specification)

*Up to 280mm when double handling (W). When it exceeds 280mm, it is single transportation.

Number of components mounted: MAX20 types (converted based on 8mm tape)

Board loading time:

Double conveying rail: 0sec during continuous operation, single conveying rail: 2.5sec (transportation between M3Ⅲ modules)

Module width: 320mm

Machine size: L: 1295mm (M3III×4, M6III×2)/645mm (M3III×2, M6III) W: 1900.2mm H: 1476mm

Number of nozzles: 12

Capacity (cph): 25,000 components with or without confirmation function ON: 24,000

Target component size (mm): 0402~7.5×7.5 Height: 3.0mm maximum

Mounting accuracy (based on the reference positioning point): ±0.038 (±0.050) mm (3σ) cpk≧1.00

*±0.038mm is the result of mounting (high-precision adjustment) of rectangular chip components under our company's better conditions.

Number of nozzles: 4

Capacity (cph): 11,000

Target component size (mm): 1608~15×15 Height: 6.5mm maximum

Mounting accuracy (based on the reference positioning point): ±0.040mm (3σ) cpk≧1.00

Number of nozzles: 1

Capacity (cph): 47,000

Target component size (mm): 1608~74×74 (32×100) Height: 25.4mm maximum

Mounting accuracy (based on the reference positioning point): ±0.030mm (3σ) cpk≧1.00

Intelligent feeder: corresponding to 4・8・12・16・24・32・44・56・72・88・104mm width material band

Tube feeder: 4≦component width≦15mm (6≦material tube width≦18mm), 15≦component width≦32mm (18≦material tube width≦36mm)

Tray unit: Corresponding tray size 135.9×322.6mm (JEDEC specification) (Pray unit-M), 276×330mm (Pray unit-LT), 143×330mm (Pray unit-LTC)

Options:

Tray feeder, PCUII (feed bracket replacement unit), MCU (module replacement unit), management computer placement table, FUJICAMXAdapter, Fujitrax.



Contact

National service hotline

135 1032 1270

Contact: Miss Jiang

Mail box: market@topsmt.com

Address: 201, Building 4, Innovation Port, Hanyu Bay, Fuhai Street, Baoan District, Shenzhen