characteristic:

Fuji NXT-M6III modular high-speed multi-function placement machine , with a thorough modular design concept, foreign equipment, good condition and new equipment.

Fuji NXT M6III placement machine parameters:

Target circuit board size (LxW): 48mm × 48mm ~ 534mm × 510mm (dual conveyor rail specification)

48mm×48mm～534mm×610mm (single conveyor track specification)

* When double conveying rail (W) is used, the maximum is 280 mm. When exceeding 280 mm, it becomes single conveying rail conveying.

Number of components mounted: MAX45 type (8mm tape conversion)

Board loading time:

Double conveyor rail: 0 sec during continuous operation, single conveyor rail: 3.4 sec (transportation between each module of M6 III)

Module width: 645mm

Machine size: L: 1295mm (M3III×4, M6III×2)/645mm (M3III×2, M6III) W: 1900.2mm Number of nozzles: 12

Capacity (cph): 25,000 components with or without confirmation function ON: 24,000

Target component size (mm): 0402～7.5×7.5 Height: 3.0mm maximum

Mounting accuracy (based on the reference positioning point): ±0.038 (±0.050) mm (3σ) cpk≧1.00

*±0.038mm is the result of mounting (high-precision adjustment) of rectangular chip components under our company's better conditions.

Number of nozzles: 4

Capacity (cph): 11,000

Target component size (mm): 1608～15×15 Height: 6.5mm maximum

Mounting accuracy (based on the reference positioning point): ±0.040mm (3σ) cpk≧1.00

Number of nozzles: 1

Capacity (cph): 47,000

Target component size (mm): 1608～74×74 (32×100) Height: 25.4mm maximum

Mounting accuracy (based on the reference positioning point): ±0.030mm (3σ) cpk≧1.00

Intelligent feeder: corresponding to 4･8･12･16･24･32･44･56･72･88･104mm width material belt

Tube feeder: 4≦component width≦15mm (6≦material tube width≦18mm), 15≦component width≦32mm (18≦material tube width≦36mm)

Tray unit: Corresponding tray size 135.9×322.6mm (JEDEC specification) (tray unit-M), 276×330mm (tray unit-LT), 143×330mm (tray unit-LTC)

Options:

Tray feeder, PCUII (feed tray replacement unit), MCU (module replacement unit), management computer placement table, FUJICAMXAdapter, Fujitrax.

Shenzhen Topco Electronic Equipment Co., Ltd. specializes in providing the following SMT equipment to electronic manufacturers:

MPM printing press , Koh Young  SPI , AOI

Panasonic placement machine , Fuji placement machine , Siemens placement machine , placement machine rental

Meilu AOI , Vitronics Soltec reflow soldering

The entire SMT production line equipment, as well as spare parts, services and solutions